Features & Benefits Engineered for internal combustion engines including two-stroke Reduces friction & wear – Optimises engine performance Compatible with all mineral and synthetic oils Will not void warranties – backed by our product liability insurance Pure petroleum-based No solids, PTFE or other corrosive elements Formulated to prevent corrosion

Available sizes: 5L, 20L, 60L & 200L

Bitron EP20 is a unique 100% pure petroleum-based metal treatment that is compatible with all mineral and synthetic oils. It is engineered specifically for use in all Diesel, Petrol and LPG engines. The product is formulated to enhance your engine’s oil.

Bitron EP20 contains antioxidants which increase the engine oil’s tolerance to high operating temperatures. This results in increased lubrication over a longer period of time. The action of the antioxidant in EP20 reduces friction and will extend the life of your oil and engine. EP20 is effective under the most severe operating conditions. The product is non-corrosive and is compatible with all metals and engine seals. Because EP20 contains no solid lubricants it does not produce the sludge associated with some other products.

Bitron EP20 helps break the cycle of heat caused by friction. Constant friction can ultimately cause engine failure. As the temperature of engine oils increases it becomes thinner and flows away from the source of the heat. Bitron EP20 is designed to provide a protective coating over all metal surfaces within the engine. This protective coating provides constant protection particularly during cold starts when engine oil has settled to the bottom of the sump. Bitron EP20 contains antioxidants which increase the engine oils tolerance to high operating temperatures. This results in increased lubrication over a longer period of time.

Other Benefits of Treatment Include:

• A quieter and smoother engine with a lighter and quicker throttle response
• An increase in top-end RPM
• Less decrease in speed while hill-climbing requiring fewer gear changes
• Easier cold weather starting reducing wear and tear on engines
• Releasing of piston rings that are fouled or frozen from hydrocarbon residue
• Reduction in oil consumption
• Reduced oil contaminates increasing oil protection resulting in less downtime
• Maximising of compression and horsepower especially noted whilst towing or hill climbing
• Improvement in fuel efficiency
• Reduction in Hydrocarbon residue allowing smoother piston movement
• Significant reduction in:
1. Black and White smoke
2. Particulates
3. NOX and other greenhouse gases
• Bitron EP20 Engine Treatment will not undo pre-existing wear, but could help extend engine life

Points to Note

• When using Bitron EP20 for the first time in older machinery or machinery with an unknown service history it is important to follow the “initial treatment” directions on the products label.
• When performing oil analysis, the first couple of samples after adding Bitron EP20 may show elevated readings. This is normal and due to the cleaning action of the product. Ongoing oil analysis will show substantial reductions in particle readings.
• While Bitron EP20 can be added to oil of any condition, its abilities will be enhanced if it is added to fresh, clean oil.
• Care should be taken not to overfill your engine.
• The addition of Bitron EP20 Engine Treatment may result in increased idling RPM due to a reduction in friction. Re-adjust idle RPM to the equipment manufacturer’s recommended setting.
• Turbo Chargers – Bitron EP20 will reduce the friction and heat associated with turbo chargers, and prevent carbon build-up.
• EP20 is not a cure-all for mechanical problems. In some cases the detergent effects of Bitron may expose pre-existing problems (eg damaged seals or gaskets).
• Bitron EP20 is compatible with any kind of metal components and seals.